All Installation Instructions for Jenn-Air Cooktop JGD8430ADB

Broken knobs on the drop in range top.

My son that is now in the Army National Guard was rather rough on the knobs for the range. Instead of pushing down and then turning, he would just turn the knobs and broke three of them. I only had one left that would operate all of the burners. I searched all over the local area and could not find any replacements for them. I went to the internet and found your site and the exact knobs I needed to replace the broken ones with. I received the new knobs in the mail and then put them on the range. It is nice to have knobs that actually work and it makes cooking much easier.

Parts Used:

Knob - Chrome

Jerry W. from Weiser, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

burner porsclend was cracked and would not light

removed grate and cap.unscrewed burner plate.disconnected spark wire and replaced with new part.fired it up .now it workes again.

Parts Used:

Large Burner Head

edward from nanticoke, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Former Burner Knob was broken

Pulled old ones off and replaced new ones by pushing them on the spindles. Very easy!

Parts Used:

Knob - Chrome

FRED from Flower Mound, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

The female D stem fitting of the control knob cracked, we could not turn on / off or control temperature to that heated area.

We replaced the control knob with an exact replica from PartSelect at a very reasonable price – Thank you.

Parts Used:

Knob - Chrome

Richard from Harrisville, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

Burner knob socket was broken

pull out the old knob and replace with a new one.

Parts Used:

Burner Knob - Stainless Color

Yosh from Mill Creek, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Burner Head was leaking gas from side

I lifted the burner tray from stove turned it upside down then removed six small screws from side of cover pan then I removed the cover then I removed the screws from the back of the old burners and igniter.Then I turned the old burner counter clockwise and it lifted out easly. the igniter is removed with no problem. The new burner is put in place and turned clockwise to lock in place.Then replace then the gas tubes and igniter and igniter wire then put tray cover on.

Parts Used: