JCD2389DES Jenn-Air Refrigerator - Instructions

Followed the video exactly. Replaced both valves in less than 1 hour. No more leakage. Very simple!

Pull out plastic cover #13of refrigerator part discription (temp. control and light socket), snap out old light socket and replaced with new light socket. light is now working.

Shut off the refrigerator. removed the food from the top shelf and lowered the shelf for more room. opened up compartment at the top of the refrigerator, located the bad defrost part un plugged the part and plugged in the new one. Buttoned everything back up. 2.Squeezed the Air return cover to remove it and replaced it with the new one. Everything works perfectly!!

Empty out freezer loosen two top screws and took out bottom screw. Lifted out ice maker and unplugged wire. Took bailing arm and plug and put on new ice maker and reverse the process. Had ice in three hours and no leaks.

So easy to repair. Parts select offered the most likely solutions and repair parts to fix this problem. Ordered the ADB and replaced it in a matter of minutes. Saved myself at least 2-300 dollars by doing the repair myself. All seems fine. Its been almost a week now and the freezerad fridge are both working famously!

Removed wiring from old ice maker and install on new. With 2 screws all ready in place hung ice maker on them. Attach wire connector into socket and install bottom screw to hold ice maker. Tighten top 2 screw and put wire guide in place. Drop wire guide down and ice started in 10 mins

I unplugged the refrigerater, then proceeded to remove the three screws that hold the dispenser face in position. When I lifted the dispenser face out of the way, I removed the remaining two screws that held the dispenser actuator pad in place. I lifted the unit away and turned it over. No need to unplug any cables. I simply lifted the old pad away, replacing it with the new pad. I re-assembled everything in the order in which I took it apart. Plugged the fridge back in. Tested the new actuator. Problem solved!