JBS28G2K3 General Electric Range - Instructions

Piece of cake- remove two screws, remove old element, install new one.
Shipping was prompt and I was glad to see the part was the genuine GE article. The price was also good- about a 40% savings over the local Appliance Depot!

Easy

I really just want to say how fast Part Select sent my part out...I had no idea it would arrive so quick...Thanks Very much for great customer service...obviously the installation of the bake element is very quick, all you need is a screwdriver, 4 screws, very simple..

We are really excited to have this burner working again. We originally paid a repairman to come out and he said that he couldn't get parts so we would just have to live with it or replace the whole cooktop. We received the new burner within a few days of ordering. I pulled the two burner unit out of the cooktop, easily removed about 7 nuts and had access to the burners. It was a perfect replacement and fit right in. The only place I had to spend a little extra time was where the connection wires are screwed to the burner. One unscrewed but the other one broke and I had to cut it off the old unit and remove a little wire insulation before re-installing.

Removed screws from the element and installed the new element. It was real easy. The shipment was real fast and the cost was great. Thanks

Removed back panel. Removed the defective solenoid on its bracket. Replaced it with the new door latch solenoid. This was relatively easy. Replaced the back panel. Tested self cleaning feature. Everything worked fine. I have preformed this same repair once before.