All Installation Instructions for Maytag Refrigerator GT1723NEHW

The support had broken and the shelf was just hanging there.

I unscrewed the support and replaced it with one that I ordered. It was fast and easy.

Parts Used:

Crisper Drawer Shelf Support

Deanie from Amarillo, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replace glass shelf and support

The items arrived the next day, in perfect condition (I was concerned about the tempered glass shelf in the mail). These items saved me from buying a new refrigerator!

Parts Used:

Crisper Drawer Shelf Support

Crisper Glass Shelf

Jaynab from Norwalk, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper shelf glass broke while washing

The part just slips into its frame in the refrigerator. Super-easy. It took me longer to get the glass shelf out of the box than to install it.

Thanks!

Parts Used:

Crisper Glass Shelf

Tara from Somerville, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Shelf Supports Broke

Took out lower shelf. Unscrewed screws holding two broken shelf supports and removed broken supports. Replaced with new supports and screwed in the screws. Nothing to it.

Parts Used:

Crisper Drawer Shelf Support

Tom from Bethlehem, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Supports inside of refrig. broke, two on right side.

Removed the Crisper drawers and shelf. I then used a nutdriver to remove the broken supports, and installed the new supports using the same screws.

Parts Used:

Crisper Drawer Shelf Support

Joe from West Henrietta, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Shelf Support btoken.

Removed screw holding the broken support then using the same screw installed new support. Easy job.

Parts Used:

Crisper Drawer Shelf Support

Edward from Tullahoma, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

lower hinge was squeeking

took off lower bracket, replaced parts, put back together, no more squeek!

Parts Used:

Hinge Washer

Lower Hinge Pin

Jean from Bayport, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

1 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door trim bent and ugly

Just removed old trim and attached new trim by hand. good results. Happy with your product and tmeliness of delivery Thanks Doug Salter

Parts Used:

Door Shelf Retainer Bar

douglas from surprise, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Broken crisper support

The main issue is that my supports are NOT held on by screws -- they are behind the fridge wall and can not be removed. So this is my solution (ignore the 'fix kit' -- it is useless and is just this part plus a metal screw. It cost me $20 to find this out). Here is what I did: 1) Cut off the old support with a knife. 2) Get a small toggle bolt (I used 1/8" x 2", < $2 from Home Depot) and thread into new support. 3) Dig around in insulation to make sure there is space for toggle to flip open. 4) Install!!!! Wish I'd thought of this before :-)

Parts Used:

Crisper Drawer Shelf Support