GSM1800F00WW General Electric Dishwasher - Instructions

Simply screwed in the new rinse aid cap to replace the old one

1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.

I found a few how to videos to describe how to replace the latch since nothing was listed here. First - turn off the power to the dishwasher from the fuse box. Open the dishwasher and unscrew the door until the front piece and the control panel come off (I think there were about 10 screws- some are different sizes, just take note what goes where). Then you'll need to disconnect the 4 wires from the broken latch, before you do this either label the actual wires with where they go or take a picture so you know exactly how to put it back together - there is very little information online to guide you if you forget and if you get it wrong the dishwasher won't work, which I learned the hard way. Unscrew the broken latch, and replace with the new latch. Reconnect the wires following your guide, and screw back on the door. Voila!