remove screws from the door trim remove two screws from the handle and replace with new found out the handle is directional had to remove and reinstale in right direction reinstae the screws for the door trim
turntable broke, spring was missing, filters needed changing
it was a breeze, the parts arrived in great condition and all was self explanatory, No directions or tools needed - filters replaced, turntable placed back in microwave and spring replaced.
Turntable Driver was down to two legs . . . one had melted into a blob!
I removed the injured turntable driver . . . had lost one of its three legs due to some sort of uber-thermal meltdown! As a result, the microwave turntable was turning a bit, stopping, turning a bit more, stopping . . . I was concerned I wouldn't be able to find such a tiny little part, but voila . . . PartSelect had what I needed. Other than the cost (it's just a tiny piece of plastic!) and s/h . . . I'm happy to have a fully functional microwave back! I simply popped the new turntable driver into place and replaced the glass turntable and plastic ring.
replaced the above and t. ring, spacer and motor. from underneath the microwave, two screws lets motore drop down, then detach two wires from terminals on moter (be sure to unplug the microwave first) and from insdie the microwave the driver pulls up off the motor shaft easily.
There was no installation involved. I just placed the new tray in my microwave. What is amazing however, is I ordered my part early one morning, the tray arrived at my door step the next day.I paid for regular shipping. Thanks guys good work
We took out 10 screws on bottom of microwave. Removed turntable motor. Determined motor was bad by turning and listening while it was turned by hand. Bought motor online. 2 days later motor arrived and we installed it...EASY BREEZE Microwave works GREAT....
Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure very easy.
My girlfriend's microwave did not spin anything and didn't cook very well
I opened the door, inserted the part, and automatically became her hero! She even began to sing Bette Midler's Wind Beneath My Wings: "Did you ever know that you're my hero..."