Models > GDG9700 > Instructions

GDG9700 Maytag Dryer - Instructions

All Instructions for the GDG9700
1156 - 1160 of 1160
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
need to replace the coils
Removed 2 screws at the lint filter, unplugged dryer, next I popped the top off with a standard screw driver lifted the top all the way up and secured it from falling back down, used a 5/16" nut driver to remove the top 2 screws holding the face on, disconnected the door switch, pulled the face panel off and set it aside, then I removed the tension pulley on the bottom and took the drum out, unscrewed 2 screws holding the coils removed the old coils and installed the new reconnected the leads to them, vacuumed out the cabinet and motor, inspected all moving parts for wear, including the belt, reinstalled every thing in reverse order, had job complete and ready for clothes in 9 mins, it helps to have your son/daughter hold the drum against the back wall while reconnecting the tensioner and belt.
Parts Used:
M Series New Style Coil Kit
  • dan from macomb, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
I have a Maytag gas dryer, it runs but it dud'nt get hot....
First I opened the back panel & check the fuse with multi meter tool ( put in ohms & set it in 200K) & the fuse is Ok, try to run the dryer while looking in the flame dock & the burner starts & had a fire till about 2-3 mins. & flame comes off, what I did is I open the front door to access into the gas burner, check gas valve coils with multi meter tool for continuity & found out that one of the coil doesn't have continuity. I ordered a pair of coil that is located on top of the gas valve on this site & unexpectedly it came in the next day, WOW! that's a fast delivery I was very pleased w/ the service, come home from work & installed it right away & it took me 5-10 mins. Put back everything & try to run it & it works properly. So happy with & my wife as we'll, thanks for the great fast delivery.
Parts Used:
M Series New Style Coil Kit
  • Darwin from Meriden, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Took too long to dry
Watched the video and followed the directions. It was pretty easy, but, I ended up having to call the repairman anyway. After the heating element was put on we put the cycling thermostat on. I didn't know it, but I put some wires on upside down. I bought a heating element, a cycling thermostat, thermal fuse, and a thermal cut off kit. All that, and I still had to pay a repairman. If you're good with wires, or have some knowledge of appliances this is an easy fix.
Parts Used:
Dryer Cycling Thermostat
  • Michelle from ALBANY, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
It was making a lot of noises
IT was good My husband fixed it .sorry we didn't take video but it is working alright. Thank you
Parts Used:
Drum Support Roller Kit
  • Margaret from Bedford, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
rumble when dryer started, then continuing rumble and occasional click when it was running
The videos available on the net illustrate this pretty well. I just wanted to mention that I did this in two passes. I ordered a new belt, the two drum rollers, and the idler pulley, assuming that the rumble was caused by binding in one of the rollers or the pulley, causing the belt to slip. When I got it apart, I realized the rumbling was caused by the blower wheel slipping on its shaft. So if you have this symptom, check that the blower wheel is secure on the shaft first thing. Replacing the blower wheel is a much cheaper and easier repair than replacing the belt, rollers, & pulley.
Parts Used:
Blower Wheel with Clamp
  • Bruce from Indianapolis, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GDG9700
1156 - 1160 of 1160