GDG8300 Maytag Dryer - Instructions

First I opened the back panel & check the fuse with multi meter tool ( put in ohms & set it in 200K) & the fuse is Ok, try to run the dryer while looking in the flame dock & the burner starts & had a fire till about 2-3 mins. & flame comes off, what I did is I open the front door to access into the gas burner, check gas valve coils with multi meter tool for continuity & found out that one of the coil doesn't have continuity. I ordered a pair of coil that is located on top of the gas valve on this site & unexpectedly it came in the next day, WOW! that's a fast delivery I was very pleased w/ the service, come home from work & installed it right away & it took me 5-10 mins. Put back everything & try to run it & it works properly. So happy with & my wife as we'll, thanks for the great fast delivery.

IT was good My husband fixed it .sorry we didn't take video but it is working alright. Thank you

The videos available on the net illustrate this pretty well. I just wanted to mention that I did this in two passes. I ordered a new belt, the two drum rollers, and the idler pulley, assuming that the rumble was caused by binding in one of the rollers or the pulley, causing the belt to slip. When I got it apart, I realized the rumbling was caused by the blower wheel slipping on its shaft. So if you have this symptom, check that the blower wheel is secure on the shaft first thing. Replacing the blower wheel is a much cheaper and easier repair than replacing the belt, rollers, & pulley.