FRS26H5ASB4 Frigidaire Refrigerator - Instructions

After removing the drip tray to expose the three screws i removed them. this allowed me to partially remove the unit from the door i was able to remove the two screws holding the actuator without removing the unit or the fill tube. I then installed new actuator and reassembled unit. Was surprised how easily it went.

I removed the old shelf and replaced with new one.
No tools needed.

This would have been an easy repair, but I bought the Frig from Lowes and I think they added the icemaker. The replacement icemaker uint has a plug on it for easy replacement. My frig was hard wired so I had to cut off the plug and splice the wires. Not a real big deal but a small work space.

All I did was follow the instructions Jonathan from Texas posted and it was very easy. Thanks to him!!!

removed the old parts with a philips screwdriver then repalced those parts with the new parts and knocked the keeper inwith the small hammer

It was just a matter of taking out 1 screw that held the old support, replacing the drawer support with the new piece and replacing the screw that held it on.

It was pretty easy. The hardest part was getting the supports that had snapped off out of the walls of the refrigerator. Once that was accomplished it was a breeze.

I ordered a new shelf and it fit exactly and snapped in to place perfectly.

I removed the door actuated light switch with my index finger and thumb on my right hand. I then removed the two wires from the switch. I noticed that the new switch had different look to it,I think Frigidaire must have had a problem with the original design of the switch. Reassembly was just replacing the two wires and putting the new switch in place, and no more door closing problem.

Remove two bolts holding bracket keeping the door mounted on top of the refrigerator, remove mounting bracket. Lift off door, invert and remove bits of old damaged bearing. Insert new bearing into holder on door at bottom an refit door on to body. Replace bracket on top of refrigerator. That's all

took existing water valve loose, removed plastic water lines and reinstalled on new valve and installed new valve into refrigerator

Took the door off and pulled out old part and then pushed in new part. The best part of it was locally the parts house wanted $40 for the part. I bought it heare with shipping for $5. You Rock

Opened the box. Took off the end caps and popped it right into place. Easy as pie!

I just put pressure to put the parts on place

Removed the one screw holding the rail, positioned the new rail and put the screw back in.

This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.