Models > FGEF3035RFA > Symptoms > Oven is too hot

Parts That Fix Frigidaire Range FGEF3035RFA Oven is too hot

Oven is too hot is a commonly reported symptom for the FGEF3035RFA Frigidaire Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your FGEF3035RFA Frigidaire Range that will fix Oven is too hot. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Temperature Sensor
Fixes Symptom 93% of time
Temperature Sensor – Part Number: 316490000
★★★★★
★★★★★
46 Reviews

Rated by 25 customers 

  

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The probe allows the oven to maintain the set temperature by sensing the temperature and sending the information to the ovens motherboard. You may need to replace this part if oven is not heating or is heating unevenly. Be sure to disconnect power to oven before replacing, as it is an electrical part. Tools needed are 1/4 inch nut driver and needle nose pliers.

$ 47.25
  In Stock
PartSelect Number PS1528542
Manufacturer Part Number 316490000

Replacing your Frigidaire Range Temperature Sensor

Replacing your Temperature Sensor

Customer Repair Stories

oven temp not consistent with setting

took off back cover and unplugged old unit and installed new unit. oven probe was not the issue. probally control panel malfunction of readings. will continue using oven temperatue gauge inside to get settings for temperture as temp is important for baking.
  • john from spring, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
68 of 150 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

oven did not heat up

Replaced the probe because that's what this site recommended.The oven still does not heat up.
  • Tim from ASHAWAY, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
68 of 103 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Range Electronic Control Board
Fixes Symptom 7% of time
Range Electronic Control Board – Part Number: 5304510064
★★★★★
★★★★★
8 Reviews

Rated by 3 customers 

  

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.   

This is an authentic electronic control board, which works with ranges.

$ 272.71
  In Stock
PartSelect Number PS12074908
Manufacturer Part Number 5304510064

Customer Repair Stories

Oven units not working

I Removed the backing and then I removed the 4 screws holding the controller , opening the new one and placing the face plate on it , I then proceeded to place the new one into place . I then removed one wire at a time from old old to new one . Replace the back and turned power on . Really super easy !!!
  • Bryant from CLOVER, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Oven didn’t heat

Easy
  • joe from Sitka, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top