FDB4315LFC3 Frigidaire Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dispenser would not dispense.
Removed 4 screws on door cover, 6 screws on dispenser 4 wires and reinstalled new one. Done less than 20 minutes.
Parts Used:
-
Johnie from Aztec, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lower spray arms were curving upward because of drying heater element, catching on lower rack, and wasn't turning or cleaning anything.
Pulled the bent spray arm straight out, snapped the new arm back on. Took 10 seconds, and no tools needed. Wish all repairs were that easy....
Parts Used:
-
David from Westfield, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No water
Tested main water supply first and it checked out, next thing was the valve got a new one took old one off, flushed the line a few times to get dirty deposited water out, stuck the new inlet valve on and ran the dish washer and it worked, really a pretty easy thing to do anybody can do it and it will save you a couple hundred bucks in the repair mans labor and his cost for parts, deffinetly a must do yourself job. Got my part in two days from when I ordered it.
Parts Used:
-
Bret R. from Angola, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
dishwasher would stop after about one minute and give a code on the screen
Looked up the code on the internet and it said it was the vent fan, was easy to pull out and replace. Saved hundreds
Parts Used:
-
jeff from beach park, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bottom door gasket had fallen out.
I had tried to put the old gasket back in place while waiting for the new to arrive and in doing so, the gasket had gone up beyond reach.We removed the screws on the inside of the door and I was able to reach and remove the old gasket. After replacing the screws, I then simply slid the new gasket into place. Easy! If I can do it, anyone can. Flo
Parts Used:
-
Flo from Hannibal, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door Leaking
All I have to say is paets select is the best company I have delt with in the last 20 years
Parts Used:
-
willis w from broomes island, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the tub was leaking at the right front corner
-
Raymond from El Paso, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replaced Cover and Stem Assembly Frigidaire DW
Your site is awesome.. not only show the parts but a video for the repair as well.. very smart site.. I will be back.. The repair was quick and easy. thank you..
Parts Used:
-
jamie from Fairfield, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lower Sprayer Arm Wouldn't Stay On
Took lower tray assy. Out and took 3 screws out of cover and stem assy. And replaced old with new. Took me about 15 min. Part was perfect match so job was a piece of cake.
Parts Used:
-
Charles from Del Valle, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!