FDB4315LFC0 Frigidaire Dishwasher - Instructions

the part was shipped really fast and was a perfect match for the old part. super happy with the results. thank you partselect

Removed bottom panel, Disconnected wires, put a pan under drain hose and disconnected it using pliers, let it drain,. Removed hose clamp from dishwasher and removed pump. Installed new pump in the reverse order. (note: I used screw type hose clamps on both hoses, as getting pliers in the small area, was a pain)

Instructions link was sent with the invoice that were dead on. The instructions and video were so comprehensive that any elementry school age child could perform the repair like a pro. Good Job Part Select!!!!!

I was ready to just buy a new dishwasher, I was sure that this leaking (flooding) was serious and I didn't want to pay a repairman big $$ to tell me I needed a new machine...So, I found this website and the "Instant repairman" suggested these parts and I saw reviews from other customers who did it, and I decided it was worth a try well anyway the repair was so simple and for one part there was even a video...The machine does not leak anymore and I am thrilled. For the Bottom Gasket just watch the video and the Tub gasket I only needed a screwdriver and siscors...just pull the old one out and put the new one in starting on one side and pushing in to the gap as you go, trim the other end as needed.

Purchased new drain pump thinking that was the issue. When I was installing I noticed the drain hose was clogged. Since the way out cabinets were installed by the previous owner getting the dishwasher out is a little more complex so installed the drain pump and drain hose just to make sure. Runs like new!

I found the source of the leak, which was a worn rubber piece that had come apart. I ordered a new piece from your company, and when it arrived, I slipped it into a channel at the bottom of the door. It WORKED! No more leak. the part you sent worked perfectly.

Dropped in new basket

Replaced the upper spray arm with a new one and it works just fine. No tools were necessary. The "How To" video was very helpful. Thank you!

power off, take off kickplate, unplug 2 wires and unscrew broken nuts, put new nuts on, plug wires back in,(run dishwasher one cycle to make sure no leaks) put kickplate back on, power on.

After I discovered the upper spray arm was not a three piece part that snapped together, it was replaced by a single piece arm that simply screwed into place. Repair time-3 minutes

Unscrewed broken upper spray arm from dish washer and replaced it with new upper spray arm.

Disconnected power and water, pull dishwasher out. I layed the dish washer on its side for easy access to moter, remore power plugs and 2 tork head screws motor will slide out. I used a small amount of vegtable oil on new o-rings to help slide motor in, relace bracket and screws and plug in power plugs. reinstall dishwasher hook water and power up,ready to go.

I got the correct parts, installed them in no time, and the problem is no more.

replacement part is better engineered so three pieces won't come apart. Install was super easy and did not require tools.

Website very easy to use to get to parts. Diagrams wonderfully helpful to confirm which part is needed. Ordering part very easy and pricing is fair and competitive. PartSelect kept me informed of part being shipped via email. Part well packaged and intact when received. Viewed extremely helpful "how to" video which further reassured me to order part and increased my confidence that I can do it. Took my time inserting the part and found it to be very easy! Wow! My dishwasher operates like it did when it was new! Great to know that replacement parts exist!