Models > EIMED55IMB3 > Instructions

EIMED55IMB3 Electrolux Dryer - Instructions

All Instructions for the EIMED55IMB3
16 - 16 of 16
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer Would Not Heat
I researched possible causes on line and watched a PartsSelect video on YouTube on how to test. I ended up misreading test results and ordered the High Limit Thermostat but subsequently realized problem was the Terminal Block. No problem, PartsSelect took back the Thermostat (I hadn't installed it) and shipped me the Terminal Block. My dryer was back up and running in less than 7 days from initial analysis to installation of Terminal Block. Instructions that came in confirmation email for installation were perfect and easy to follow. Total cost with new power cord from Home Depot was less than $50 vs a quoted service call of $175+ parts from local electrician.
Parts Used:
High Limit Thermostat
  • John from Hummelstown, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the EIMED55IMB3
16 - 16 of 16