Switch to Classic
Models > ED5GVEXVD02 > Instructions

ED5GVEXVD02 Whirlpool Refrigerator - Instructions

All Instructions for the ED5GVEXVD02
1231 - 1245 of 1255
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My ice maker was not crushing ice
I saw a video of it, and simply took apart the ice maker and put the new Auger Drum in, then reassembled the ice maker.
Parts Used:
Ice Bin Auger Drum
  • David from Pueblo, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
door of the refrigerator would not pull itself closed.
The hard part of the repair was getting the wife to empty the refrigerator door shelves. Once that was done simply removed the three screws on the door on the top of the door removed the bottom cam located on the bottom inside of the door. One of the simplest repairs I've ever done. Watching the you-tube video was a great help.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control Lower Door Closing Cam
  • Roy from Council Grove, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
you have to turn it off and on to run.
Just like the video showed me.It still does not work. Have to turn it off and on to make it start up.I also replaced thermostat in freezer. Does not work.
Parts Used:
Capacitor
  • chris from woodland hills, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Door water dispenser broken
Removed outer cover. Removed control bracket which holds the water/ice dispenser paddles. Removed paddles from old/broken bracket, plastic pins were broken where the paddles hinge. Placed on new bracket placed screws and it was done. Very simple repair. Part cost less then $18.00 including shipping. Saved me mucho dollars!!!!
Parts Used:
Control Bracket
  • matthew from fresno, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
no water but icemaker would dispense
hardest part getting the putty knife in right place to pop off cover---found the plastic bracket was broken where the switch was held in place---- so ordered new switches and bracket ---- got the parts in 3 days--good service--easy job 2 do and saved lots of $$$$$$$$---
Parts Used:
Control Bracket Micro Switch
  • conley from Melbourne, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Door bins were broken
I absolutely could not believe that the 2 bins we ordered arrived the 2nd day after I ordered them when I just used ground service! So nice to have usable bins again...and they snapped right in. Thanks for your prompt service.
Parts Used:
Refrigerator Door Shelf Bin - White
  • Jan from Carlton, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Solid ice on Evaporator coil
With service sheet, Enter service dagnostic mode, NO-6 is Desrost heater / Bi-metal Component status indicator shows 02 , it means Bi-metal is open, It should read 01,It's cover with Ice ( bellow 32 Dig. F )Mostly it open at 50 dig. F, To replace remove lamp cover and lamp + six hex screw with 1/4" nut driver, pull back cover ( with commen requirement to turn of power and deice the evaporator coil )out, bi-metal element is top at enterance of coil,cut both wire near bi-metal, join new bi-metal with wire nut or Insulated wire Jointer, Tape jonts proper,do neat work no hanging wire, Replace back removed parts back,Turn power back
Parts Used:
Bi-Metal Defrost Thermostat Light Bulb - 40W
  • PRAKASH from PISCATAWAY, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer was constantly running and not getting hot
Removal of the old heating element was really easy. The video on Partselect.com was majorly helpful in reassuring my confidence in doing this repair.
Parts Used:
Refrigerator Crisper Drawer With Handle
  • HENRY from WARMSPRINGS, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Just a bit tight getting to some wires
I watched your video and did just as he did. The video made it real easy and rather simple. It looked like it was going to be a mess until I watched the video.
Parts Used:
Control Bracket
  • Mike from Spokane, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
shelbes and drawer have cracks , so they needed replacement
take out the old ones and put on the new, real simple. Thanks so much for the prompt delivery.
Parts Used:
Refrigerator Slide-Out Shelf with Glass Refrigerator Shelf Frame with Glass Refrigerator Crisper Drawer With Handle
  • Niurka from Raliegh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
freezer and refrigerator compartments not cold enough
Used the suggested problem list here to narrow down that the repair was most likely the run capacitor. Poped the new one in and I now have better control of my compartment ranges. I have a temperature gauge in each compartment. Check them every opening of the doors.
Parts Used:
Capacitor
  • Michael from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
not dispensing ice at the freezer door
I watched the short video at this website about replacing the bracket first. Then I replaced mine. Everything went smooth. No problems. Try it yourself.
Parts Used:
Control Bracket
  • Kenneth from Sebastian, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
cracked/broken doorbin
i removed old door bin and replaced it with the new one. they are not attached with screws or bolts, they remove easily by pulling up and out.
Parts Used:
Refrigerator Door Shelf Bin - White
  • Roman from Wisconsin Bells, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door shevles
All i had to was remove the broken shelves and replace the new shelves. It took a few minutes to do that.
Parts Used:
Refrigerator Door Shelf Bin - White
  • Gregory from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Cracked drip tray
Unscrewed the rear water valve and water line, and front water filter which allowed me to remove the old drip tray. New drip tray is smaller than the original tray, so I needed to put blocking in to keep tray under drip spout. Refastened the water filter, water valve and water line.
Parts Used:
Evaporator Drip Tray
  • Michael from Ft. Myers, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ED5GVEXVD02
1231 - 1245 of 1255