Models
>
ECS136
ECS136 Dacor - Overview
Models starting with ECS136
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
SVC-HALOGEN BULB 10W 12VAC;86573,ERD36S0
PartSelect #: PS16629306
Manufacturer #: DE81-05142A
$43.60
In Stock
SVC-SCREW WAFER HD;83534,#8 X 3/8,DH3006
PartSelect #: PS16627282
Manufacturer #: DE81-02250A
$6.23
In Stock
SVC-HIGH LIMIT SWITCH 220F;62775,DO130
PartSelect #: PS16629186
Manufacturer #: DE81-04971A
$40.39
In Stock
SVC-FILTER CONVECTION OVEN;82891,DO130
PartSelect #: PS16629177
Manufacturer #: DE81-04961A
No Longer Available
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305
PartSelect #: PS16627342
Manufacturer #: DE81-02331A
$4.18
In Stock
SVC-TEMPERATURE SENSOR;62593,E30DF74EPS
PartSelect #: PS16556806
Manufacturer #: DE81-07677A
$96.44
Special Order
SVC-BAKE ELEMENT;72347,ECS136SBK
PartSelect #: PS16632419
Manufacturer #: DE81-09710A
$81.50
Special Order
SVC-TRANSFORMER HALOGEN LIGH;62808,DO130
PartSelect #: PS16628283
Manufacturer #: DE81-03753A
$218.17
In Stock
SVC-HALOGEN LIGHT 10W 12VDC;62175,ECD227
PartSelect #: PS16628720
Manufacturer #: DE81-04342A
No Longer Available
SVC-PCB SUPPORT NYLON;83538,DHD30M967WM
PartSelect #: PS16631503
Manufacturer #: DE81-08244A
$6.23
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dacor sent a different bulb # which I CANNOT get back into the oven.
I have contacted Dacor repeatedly with no response, by both phone and left my return contact and email.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
Parts Used:
-
Marilyn from INDIAN WELLS, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
-
David from MCKINNEY, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!