E23CS78GPS0 Electrolux Refrigerator - Instructions

Because of the design of the support, this could have been a difficult job. However, with the video that was provided when I selected the part, it was not a problem. All you have to do is knock the center pin through the support and remove the old support. Pull the pin out of the wall of the unit and push the new support in and drive the new pin in until it is flush. That's it!

Once the part arrived, we followed directions to remove the refrigerator door. We removed the hinge cover which was a two-piece topping on the refrigerator. We then were able to remove the door and replace the lower Hinge Bearing. We put the door back on, replaced the cover and the door now opens and closes quietly and smoothly. We are senior citizens and not particularly "handy"....figured we saved ourselves $100. or so. Good deal.

Ordering replacement parts was easy! Expected a simple pull out old plug, insert new plug.... Not sure if it comes from factory like this or if this had been previously repaired poorly, but the broken plug was heavily glued in place. Took some serious finess work to remove without serious damage. Once out, it was simple plug in

After the original hinge fell apart, I clicked on my bookmarked Part Select www. I simply typed in the model number and followed the instruction straight to a Parts diagram. Both parts I needed were detailed in a scale picture, and were extremely easy to purchase. Partselect is the best appliance part service online, I repair all of my own appliances and save hundreds of dollars on repairs by using the reliable Partselect ordering system. PARTSELECT HAS NEVER LET ME DOWN!!!