DLSR483EG0WW General Electric Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
very good
-
vance from van hornesville, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Loud stretching
My dryer was making a loud stretching sound which I thought, because of previous experience, could be fixed by replacing the bearing slides. The problem turned out to be that the blower wheel that is attached to the motor was loose. I pushed the blower wheel all the way in so that about 1/4" of the motor shaft sticks out. I then tightened the bolt with a socket wrench. Problem solved.
Parts Used:
-
hector from bellerose, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The dryer squeaked really loud
I watched a video on PartSelect.com, opened up the dryer (that's the first time I had opened a dryer), found that the bearing was worn down, ordered the replacement parts for under $40, and fixed the dryer in just a few minutes. The whole process was much easier than I expected. I should have done it weeks ago.
Parts Used:
-
Larry from Highland, UT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Loud Squeaky Noise from Dryer
At first I thought it was the belt but when I took off top portion of dryer I saw belt was fine. I got to this site and found source of noise was drum bearings from postings. I ordered the parts and much to my suprise had it working with 15 minutes. Web site was very helpful.
Parts Used:
-
doug from Grayson, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
knob stripped
-
Robert from Strasburg, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
squeeks and grinding noise
Watched video first, then diagnosed trouble. Went to internet for cost and avalible parts. Copied parts diagram. Very pleased with price and orderd parts assosiated with front drum. 4 days later parts arrived.
Parts Used:
-
Michael from South Lyon, MI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer door handle broke
-
Pam from Thayer, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer was making a lot of noise when operating
Thanks to the Part Select YouTube videos, I was able to determine how to disassemble the dryer without having to spend much time trying to fixure that evolution out, and I was pretty much able to troubleshoot what the potential problems (and fixes) were via the various Part Select videos (drum slide(s) install, bearing install). The only part that took a bit of time to install was the drum rear bearing. It is an easy install, but it was helpful to have my son hold the bearing from the back (outside) of the drum while I tighten the screws from the inside of the drum. Again, watching the Part Select videos beforehand is a must!
Parts Used:
-
Mark from Mount Pleasant, SC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
crack timer knob
-
Linda D from Middletown, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Holes were not threaded on rear bearing kit
Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.
Parts Used:
-
Dennis G from Naples, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
clip on door broke
-
edward from early branch, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Squealing,Drum Wont Spin
Followed the videos on this web site and found out how easy it was to replace the belt,drum glides and felt seals. I took my time and also completely cleaned out the gas dryer from all the lint. Thank you for the great prices, fast shipping and how to videos. Bill d.
Parts Used:
-
William from South Chicago Heights, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!