DDC5000SBLWH General Electric Dryer - Parts

High Limit Thermostat

★★★★★

★★★★★

(4)

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in w... Add to cart

Air Duct Felt Seal

★★★★★

★★★★★

(1)

If your dryer is making a squeaking noise this seal may need to be replaced.

Drive Motor Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered. Add to cart

Door Switch This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

Heating Element Coil with Housing - 240V

★★★★★

★★★★★

(2)

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used... Add to cart

Blower Wheel

★★★★★

★★★★★

(1)

This wheel attaches to the motor. Add to cart

Door Hinge

★★★★★

★★★★★

(1)

Screws NOT included. Add to cart

CLAMP& SCREW

★★★★★

★★★★★

(1)

Add to cart

Thermostat - Limit: 325 This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it. Add to cart

PLUG DOOR RVSBL Sold individually. Add to cart

Thermostat This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 230 degrees... Add to cart

Motor Pulley with Screws Add to cart