DBXR453EA1WW General Electric Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer door handle broke
-
Pam from Thayer, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer was making a lot of noise when operating
Thanks to the Part Select YouTube videos, I was able to determine how to disassemble the dryer without having to spend much time trying to fixure that evolution out, and I was pretty much able to troubleshoot what the potential problems (and fixes) were via the various Part Select videos (drum slide(s) install, bearing install). The only part that took a bit of time to install was the drum rear bearing. It is an easy install, but it was helpful to have my son hold the bearing from the back (outside) of the drum while I tighten the screws from the inside of the drum. Again, watching the Part Select videos beforehand is a must!
Parts Used:
-
Mark from Mount Pleasant, SC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Holes were not threaded on rear bearing kit
Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.
Parts Used:
-
Dennis G from Naples, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
clip on door broke
-
edward from early branch, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!