Models > CW8

CW8 - Overview

Models starting with CW8

Click on the best match to narrow your results.

Parts for models starting with CW8

[Viewing 12 of 675]

Drive Belt - 51 inches long

★★★★★

(25)

PartSelect #: PS11738882

Manufacturer #: WP21352320

This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suf...

$10.98

Thrust Washer

★★★★★

(2)

PartSelect #: PS11740482

Manufacturer #: WP233520

This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below. The washer is found...

$7.95

Suspension Spring

★★★★★

(7)

PartSelect #: PS11738823

Manufacturer #: WP21001598

This suspension spring is 7 inches in length, and is sold individually. It is a good idea to replace all six springs at once to maintain the same tension level. To complete this repair you will need a...

$11.80

Lid Hinge

★★★★★

(25)

PartSelect #: PS11741780

Manufacturer #: WP35-2044

The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to replace the lid hin...

$11.18

Lid Hinge Pin

★★★★★

(10)

PartSelect #: PS11741781

Manufacturer #: WP35-2045

This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plast...

$22.28

Drain Pump with Pulley

★★★★★

(24)

PartSelect #: PS11741799

Manufacturer #: WP35-6465

This drain pump with pulley, also known as the washing machine drain pump assembly, is a pump with two ports. The function of this pump is to help expel water from your washing machine. The pump is ac...

$84.63

Snubber Ring

★★★★★

(16)

PartSelect #: PS11738845

Manufacturer #: WP21002026

The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...

$13.11

Washer Drain Pump

★★★★★

(28)

PartSelect #: PS11741803

Manufacturer #: WP35-6780

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If your machine is not draining properly or if it is noisy and s...

$120.13

Retaining Ring

PartSelect #: PS11740487

Manufacturer #: WP23748

The metal retaining ring, which is under an inch long, holds the rear wheels on the axels of the dryer. The main reason why it would need to replaced is if the retaining ring has sprung out of place o...

$13.58

Door Switch Kit

★★★★★

(19)

PartSelect #: PS1964648

Manufacturer #: W10169313

This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble,...

$29.94

Screw

★★★★★

(6)

PartSelect #: PS12349731

Manufacturer #: W11233072

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...

$20.79

Transmission Pulley and Bearing Kit

★★★★★

(16)

PartSelect #: PS2003651

Manufacturer #: 12002213

This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...

$69.83

Common Symptoms of models starting with CW8

[Viewing 13 of 13]

Leaking

Fixed by
these parts

Lid or door won’t close

Videos related to models starting with CW8

[Viewing 8 of 32]

Replacing the Suspension Spring

Replacing the Drive Belt - 51 inches long

Replacing the Thrust Washer

Replacing the Transmission Pulley and Bearing Kit

Replacing the Snubber Ring

Replacing the Door Switch Kit

Replacing the Lid Hinge

Replacing the Hose Clamp

Installation Instructions of parts on models starting with CW8

[Viewing 3 of 722]

washing machine was making alot of noise

I found the water pump bearings were going bad from humidity. I replaced the pump with a new one and it runs quiet again.

Parts Used:

Drain Pump with Pulley

David from Boca Raton, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set

561 of 571 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One of the plastic hinge pins brroke

I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.

Parts Used:

Lid Hinge Pin

Lid Hinge

Screw

Allen from North Little Rock, AR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

512 of 515 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Pump was making a grinding noise

The pump is located behind a small panel on the back, lower left side of my washer. It's attached to the bottom frame with 3 screws. It has two hoses attached, each with one spring clamp. Lift one side of the washer and slip the drive belt off the pully. Release the spring clamps on the hoses with a pair of pliers and remove the hoses. A ... Read more

Read less

Parts Used: