CVGX2423Q Jenn-Air Cooktop - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replacement filter for jenn-aire
the filter fit because the scale in the photo allowed me to choose which one to buy!
Parts Used:
-
Fred from Mount Sinai, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Nasty, clogged, old grease filter
I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)
Parts Used:
-
Kim from Cottontown, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Continuous clicking
The aluminum threads on the post (part15) can get stripped very easily. If you cannot tighten down the flat nut the clicking will occur.
Parts Used:
-
Matthew from Marengo, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The fan switch on the Jenn-Air downdraft cooktop was bad and needed to be replaced
Be sure to unplug the unit first. Removing the screws to the control panel, disconnecting the wires, and replacing the switch is the easy part. The threads are plastic where the nut holds the switch in place, and it would not stay tight, but popped loose because of the plastic threads. I added some super glue to the threads and hand tightened. Replace control panel cover, re-plug into outlet.
Parts Used:
-
ALAN from Encinitas, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!