Models > CSX20BABEWH > Instructions

CSX20BABEWH Hotpoint Refrigerator - Instructions

All Instructions for the CSX20BABEWH
496 - 501 of 501
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drawer side rails broken
With normal wear and tear over the course of ten years both of the side rails for the VC were broken. One side I successfully glued together with super glue and it has lasted more than a year. The other side kept breaking so I ordered a replacement part. Very easy installation just removed two screws (save them you will need them) and then put in the new part. Customer Service rep had no idea if the part I needed for the CSX20BA was the same as what I presume is the newer model with a longer ID code. She suggested I call GE. Not wanting to spend any more time on the phone I took a gamble and indeed it is the identical part.
Parts Used:
Drawer Slide Rail - Left Side
  • Rene from NY, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The defrost heater for the refrigerator stopped working. The 'fridge was turning into a really pathetic cooler!
I did exactly what the instructions on the e-mail stated and saved myself about 350.00! Thanks so much for the incredible service instructions and ease of getting the part needed.
Parts Used:
Defrost Heater Harness Kit
  • ASCAP from New York, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door would not close on its own because the cam was wore out.
I just followed the video instruction supplied by PartSelect and the whole thing was a breeze.
Parts Used:
Bottom Hinge Assembly
  • ANTONIO from LUTHERVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Freezer door hinge.
Removed freezer door, put a blanket over the opening to keep food frozen. Installed hinge and replaced door.
Parts Used:
Bottom Hinge Assembly
  • Mitchel from Onley, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Refridgerator door was not closing properly
Followed the u tube video that was on the Part select website. Very easy install when following the video.
Parts Used:
Bottom Hinge Assembly
  • Tim from New Berlin, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door Wasn't Closing All The Way.
Did the repair jut like the instructions on the web site stated. There was a good video for doing this repair. Looked at it a couple of times and did the repair right off the bat. Thanks folks.
Parts Used:
Bottom Hinge Assembly
  • John from Valdosta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSX20BABEWH
496 - 501 of 501