Models > CPTD227 > Instructions

CPTD227 Dacor Range - Instructions

All Instructions for the CPTD227
1 - 4 of 4
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
F2 Alarm and oven beeping
Replaced relay board
Parts Used:
Svc-Relay Board
  • David from CAMILLUS, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Temp sensor is failing
I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.

I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
Parts Used:
SVC-TEMP SENSOR KIT ROBERTSH;86663,ERSD3
  • Sarah from FORT COLLINS, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My hinge receptacle was groove was worn away cause hinge to get jam
Pulled oven about 6 inch out from cabinet. Then remove side cover piece. Push out hinge receptacle with screwdriver. Replace with new hinge receptacle and reverse process
Parts Used:
SVC-SCREW WAFER HD;83534,#8 X 3/8,DH3006 SVC-10 LOCKWASHER;83340,DHD30M967WM SVC-HINGE RECEPTACLE KIT
  • JEFFREY from KNOXVILLE, TN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305
  • David from MCKINNEY, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CPTD227
1 - 4 of 4