All Installation Instructions for Dacor Range CPTD227

F2 Alarm and oven beeping

3 of 3 people found this instruction helpful.

David from CAMILLUS, NY
Easy
15 - 30 mins
Screw drivers

Replaced relay board

Was this helpful?

My hinge receptacle was groove was worn away cause hinge to get jam

2 of 2 people found this instruction helpful.

JEFFREY from KNOXVILLE, TN
Difficult
30 - 60 mins
Screw drivers

Pulled oven about 6 inch out from cabinet. Then remove side cover piece. Push out hinge receptacle with screwdriver. Replace with new hinge receptacle and reverse process

Other Parts Used:

Screw Wafer

Service Lockwasher

Hinge Receptacle Kit

Was this helpful?

Temp sensor is failing

3 of 5 people found this instruction helpful.

Sarah from FORT COLLINS, CO
Really Easy
30 - 60 mins

I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.

I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.

Was this helpful?

Two striped out screw heads

3 of 10 people found this instruction helpful.

David from MCKINNEY, TX
Easy
Less than 15 mins

Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.

Was this helpful?

CPTD227 Dacor Range - Instructions