Models > CDB350NW7B > Instructions

CDB350NW7B Crosley Dishwasher - Instructions

All Instructions for the CDB350NW7B
421 - 430 of 430
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
loud noise dont clean dishes leaking under pump
Disconnected water supply line pulled dishwasher out from under counter unpluged power cord turned on side put towels down first took 2 screws out pulled u clip unplug wire harness. Pulled pump out put new one in
Parts Used:
Pump Motor Kit O-Ring - Front O-Ring - Rear
  • Darrin from Plymouth Meeting, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
upper spray arm fell offunscre
unscrew upper spray arm assembly, screw in new unit. Finished
Parts Used:
Upper Spray Arm
  • salvatore di from Oldsmar, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
melted spray arm
easy peasy! received part quickly. 2 days. pop right in. thanks to whoever said to turn arm till it clicks.
Parts Used:
Lower Spray Arm
  • mary from chicago, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking
Removed old gasket,placed new one on pressing into place.Very quick and easy.Saw the youtube on how to do it.Unfortunately this was not the problem.now have a new dishwasher same brand.
Parts Used:
Dishwasher Tub Gasket - Gray
  • Lauren from Marietta, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken door spring.
After watching the video the replacement went very easy. The only thing I would suggest is that you replace both springs to equalize the tension.
Parts Used:
Door Spring
  • Keith from Manitowoc, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking from underneath unit
Spotted the source of the leak at the first heating element under the dishwasher. Removed the brass mounting nut and it was cracked. Replaced with new part from PartSelect.com and the leak was fixed. Apparently the heating element gets so hot it tends to crack the mounting nuts, which results in a leak. Delivery time for part said 3-5 days - mine arrived one day after ordered!
Parts Used:
Heating Element Brass Nut
  • Keith from Meansville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
Was this instruction helpful to you?
Thank you for voting!
Spray arm was melted on end from heating element in bottom of unit. Dishes were not being cleaned well.
Replaced arm - SO easy!
Parts Used:
Lower Spray Arm
  • Sandra from Wilton, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
upper spray arm falls 0ff
the part was shipped really fast and was a perfect match for the old part. super happy with the results. thank you partselect
Parts Used:
Upper Spray Arm
  • randell from manchester, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The dishwasher was "broken" and it needed to be replaced...
When I looked at my prospective home for the first time, the current "month to month" renters made sure to tell me EVERYTHING that was wrong with the place. One of those things was that the dishwasher was broken and beyond repair. Upon moving in, my brother in law asked "Did you try turning it on??" We did, it worked and drained...so why was it "broken?" The lower spray arm kept popping out mid cycle, then would get melted on the heating units at the bottom of the unit during the drying process. I easily found and purchased the part from this site. Once it got here, I literally just had to pop it on, no tools, no mess. Fixed!
Parts Used:
Lower Spray Arm
  • Brandie from Summerville, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The lower spray arm became loose and melted on the heater.
Very simple to repair, cleaned the melted plastic from the heater, received the part within 2 days and pushed the new arm into the 2 bracket clamps and it was done. Since this was an older unit they told me the replaceable part number and the price was very reasonable..less then $30 for the whole job!
Parts Used:
Lower Spray Arm
  • Brian from Weaverville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CDB350NW7B
421 - 430 of 430