BA7500 Maytag Washer - Instructions

Because the washer was old, 27 years, I actually ordered a new machine but after doing so was able to get the old washer to pump out the water. It had overfilled and spilled water on the floor. The next time I ran the washer using "warm" setting the hot water inlet solenoid failure was evident. I checked voltage at the solenoid and it was getting power so figured I'd try ordering a $30 part. In a couple of days it showed up and after less than :30 minutes I had the washer running again. It would have taken less time but a screw stripped out and I had to locate a replacement. I'd definitely recommend PartSelect. Oh, we cancelled the replacement washer and figured the Maytag repairman could resume his slumber!

1) I removed two phillips head screws from the top of the control cover plate and placed the screws into a magnetic tray. 2) I then lifted the control cover from the washer exposing the cycle control mechanism. 3) I then traced the wires leading from the timer motor to there attachment points on the cycle control. 4) I then detached the slide on wires from the cycle control mechanism. 5) I then removed two sloted screws from the timer motor; thereby, detaching the timer motor unit from the cycle control mechanism. I placed the two slotted screws in the magnetic screw holder. 6) I then wove the new timer motor wires threw the cycle control mechanism many other wires and attached them to the leads. 7) I then positioned the new timer motor over the drive slot for the cycle control mechanism and replaced the old screws into the new timer. 8) I then set the timer control mechanism to start a new wash cycle in order to test the timer motor. It worked flawlessly. 9) I then replaced the cover and screwed in the cover screws. Repair complete!!!

Pulled the washer away from wall and tipped forward, leaning against a chair. Removed the hot and cold water hoses. Removed 1 screw. Pulled the plate off the back of the washer. Removed two screws holding the old valve onto that plate. Took 4 wires off the original valve one at a time and placed the wires one at a time on the new valve, so I didnt have to write down or remember which wire went where. Slid one hose clamp up, pushed the hose off the old valve and placed it on the new valve. Threw the two screws back on the valve and fastened it to the plate. Put the plate back on the back side of the washer with one screw. Put some teflon tape on the threads of the new water valve and screwed on the hot and cold water hoses.

Removed two screws , two more on the valve, loosened the hose clamp. Reassembled the same way

Remove front cover lower screws(2) with Phillips screwdriver. Remove Upperlid Bolts (left & right side) under top cover , Flip lid Back to access siphon break (rear right corner) Remove drain hose clamp, Remove clamp at bottom of siphon break. Remove (4) screws rear of washer around drain hose elbow. Remove siphon break, reinstall in reverse order. (Make Sure new siphon break washer is installed in siphon break.

Very easy as the water inlet valve is located on the back of the washer and it was a simple matter of shutting off the water, undoing water hoses, undoing water inlet valve which didn't even need to remove the back side of the washer and connecting the new part, water hoses and turning water back on. The hardest part was tipping the washer, my sits on top of the cold air return, and balancing on a milk crate. Very pleased with being able to do my own repair.

I followed the online installation video and it worked perfectly. I am a fan of this site and would recommend it to anyone .

With the help of my 3 year old grandson, we removed the inlet hoses and inlet panel. The water inlet valve replacement was a perfect fit. All connections conformed to the original part. I had reviewed a video at the time of order, so was familiar with the process by the time the part arrived. The website was very helpful in determination of what was needed to fix the washer problem. Shipping was fast and tracking the package provided my schedule. I will utilize this site in the future.

Maytag made this easy. The water value was mounted to a plate on the back of the washer removed one screw, pulled the plate from the washer, removed the valve, reconnected the electrical connections and outlet hose, re inserted the plate, attached with screw and tested. 30 minutes tops and I hwve never done this before. Thanks to partsselect and others for recomenning the correct repair. Others had suggestjng the timer device ($180 +) for the parts. OUCH !!!!!

just like the vidio, only a had to remove the back panel to replace the valve. but we ., or should say my mother has a working wacher now,thank you for your help,

ordered the part and it was easy to change.it worked great! Thanks

Unplugged AC cord. Removed hot and cold supply hoses. Removed front cover (2 Phillips screws near bottom). Raised lid, and removed fastening screw for injector tube. Removed retaining screws for inlet valve mounting plate. Positioned mounting plate partially inside rear of machine and removed (4) wires for solenoid connections. Re-positioned mounting plate slightly outside machine and removed valve mounting screws and old valve. Attached new valve (no modification to valve needed for my machine), and worked backwards through the steps listed above.

Went on line an watch video that described the problem. Order the part and received it overnight. Went back online to your website and watched the video on how to do the repair. Followed the suggestions in the video and finished the repair in about 30 minutes. Really appreciate the help your company give me and have bookmarked your site for future use.

very simple to repair, three screws and disconnecting water supply pulling four wires then reverse steps and done, time spent less than 15 minutes.

My husband figured out what the problem was and I looked for the part. It was easy to find on your web-site, and the picture was spot on! I ordered it and had the part in 2 days. The repair took 15 minutes or less, and my washer is as good as new. Thank you PartSelect for being there when we needed. I will recommend this to everyone.