Models > B5

B5 - Overview

Models starting with B5

Exact Part matches for your search term

[Viewing 2 of 2]
DISCONTINUED – Part Number: B5
DISCONTINUED
This part number matches the current model number B5
PartSelect #: PS150639
Manufacturer #: B5
  No Longer Available
*NLA*BAG AUTOMATED – Part Number: B5
*NLA*BAG AUTOMATED
This part number matches the current model number B5
PartSelect #: PS17194657
Manufacturer #: B5
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(66)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$11.73
  In Stock
Long Oven Sensor – Part Number: 12001656
Long Oven Sensor
★★★★★
★★★★★
(33)
PartSelect #: PS1570174
Manufacturer #: 12001656
This long oven sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of...
$34.75
  In Stock
2 Piece Broiler Pan – Part Number: 4396923
2 Piece Broiler Pan
★★★★★
★★★★★
(4)
PartSelect #: PS971245
Manufacturer #: 4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
$37.51
  In Stock
Bake Element (15 Inch long x 19 Inch wide) – Part Number: WPY04000041
Bake Element (15 Inch long x 19 Inch wide)
★★★★★
★★★★★
(6)
PartSelect #: PS11757468
Manufacturer #: WPY04000041
This spade style bake element with push on wire terminals is 15 inches long and 19 inches wide. The depth of the terminals is three inches.
$86.59
  In Stock
Clock Knob - black – Part Number: WP7711P492-60
Clock Knob - black
PartSelect #: PS11744674
Manufacturer #: WP7711P492-60
The clock knob attaches to the center of the oven control panel and is used to adjust the built-in clock. This clock knob is less than an inch in diameter. It is all black in color and is made of plas...
$20.95
  In Stock
Temperature Sensor – Part Number: WP8053344
Temperature Sensor
★★★★★
★★★★★
(8)
PartSelect #: PS11744825
Manufacturer #: WP8053344
This temperature sensor is used to measure the inside temperature of a self-cleaning oven. Its 1000-ohm resistance increases with temperature. The sensor has male leads, is 6 inches in length, and com...
  No Longer Available
Frame Screw – Part Number: WP7101P126-60
Frame Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11743908
Manufacturer #: WP7101P126-60
Sold Individually.
$7.76
  In Stock
Screw – Part Number: WP681414
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11743744
Manufacturer #: WP681414
This screw is sold individually.
$7.76
  In Stock
Screw – Part Number: WP999367
Screw
PartSelect #: PS11747799
Manufacturer #: WP999367
Sold individually.
$7.95
  In Stock
Hex Nut – Part Number: WP112432
Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts an...
$8.04
  In Stock
Twist-Style Clock Knob – Part Number: 7711P172-60
Twist-Style Clock Knob
PartSelect #: PS1655662
Manufacturer #: 7711P172-60
Sold individually.
  No Longer Available
KNOB – Part Number: W11238392
KNOB
PartSelect #: PS12578754
Manufacturer #: W11238392
$23.94
  In Stock

Common Symptoms of models starting with B5

[Viewing 9 of 9]
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Will not program
Fixed by
these parts
Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Parts Used:
Long Oven Sensor
  • David from Westford, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
156 of 196 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F1-1 code
First I removed the two screws that hold the element in place. I then pulled the sensor out about 3 inches and disconnected the two wires. Next, I connected new sensor and screwed the new sensor back in place. One area for caution. Make sure that the electrical connection is pushed in past the insulation on the back side of the oven. Failure to do so will cause the plastic plug connector to melt from oven heat.
Parts Used:
Long Oven Sensor
  • charles from marstons mills, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
74 of 99 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Repeated oven temperature sensor fault codes.
First I removed the two philips screws inside the oven that hold the element in place. Then I pulled the sensor out and the two insulated wires through the hole to reveal the plastic connector. I unsnapped it from the connector and replaced it with the new element. Then, behind the oven, I removed five or six philips screws on the right side of the large panel so I could pull the wires back through the layer of fiberglass insulation to make sure only the sensor itself would be exposed to the oven's heat. I then secured the back panel again and replaced the two philips screws holding the sensor in place.
Parts Used:
Long Oven Sensor
  • David from Arlington, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
35 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!