ARB2107AC (PARB2107AC0) Amana Refrigerator - Instructions

well, my problem was the dual water valve. I check the two water valve connectors, one was good ( yellow ) and the other connector (brown) was bad. I tested them both with an ohms meter, of course all power was off. I think when ever there's a problem with not receiving ICE this should be done before replacing the ice-maker for there's a lot of things going on in this area. The Brown Connector releases the water into the ice-tray (that tested Bad with a reading of 257 from ohms meter,and the yellow had a sound from ohms for full contact a good reading. The brown valve was bad.

Turn off the freezer and remove the ice maker (which also needs to be replaced in my case). Freezer back panel removed (including the fan assembly cover). Cut ties that hold wire harness that goes to ice maker, unplugged the two motor connections and two ground connections. Removed old motor and installed new one. Replace all wire connections and fashioned new harness support out of plastic ties. Carefully align back panel with motor cover and attach to back of freezer. I used duct tape to hold the motor cover on back pane for easier placement on holes.... Success! Hardest part was working on floor and reaching in at awkward angles.