ALG331RMW Amana Dryer - Instructions

First I opened the back panel & check the fuse with multi meter tool ( put in ohms & set it in 200K) & the fuse is Ok, try to run the dryer while looking in the flame dock & the burner starts & had a fire till about 2-3 mins. & flame comes off, what I did is I open the front door to access into the gas burner, check gas valve coils with multi meter tool for continuity & found out that one of the coil doesn't have continuity. I ordered a pair of coil that is located on top of the gas valve on this site & unexpectedly it came in the next day, WOW! that's a fast delivery I was very pleased w/ the service, come home from work & installed it right away & it took me 5-10 mins. Put back everything & try to run it & it works properly. So happy with & my wife as we'll, thanks for the great fast delivery.

On line video was great and easy to follow. The only problem I encountered was with removal of the front panel. Ours is a 20-year old dryer and the front configuration is different. You cannot lift the top, as shown in the video, before you remove the front. There is a lower front panel that has two 5/16" screws at the bottom and drops off. There are two 5/16" screws in the bottom of the door panel which allows it to drop off. Finally you remove two 5/16" screws in the brackets that hold the top to the sides and the top then tips up and to the rear. From there on the video is perfect.

Really easy popped the lid with a flat head screwdriver, then marked wires for door light and switch, took 2 5/16 bolts to remove front door, then 4 bolts also 5/16 to remove front panel but be care ful and remove drum belt then take panel and drum out. Then took a set of ring pliers to remove wheel slapped new one on.then reverse sreps to assemble.