ADB1500AWZ10 Amana Dishwasher - Instructions

followed directions (boring, I know, but it works) on the accompanying video. simple

Lifted Float out....Located Float switch ...replaced

Remove lower basket. put nut on verticle shaft, turn clockise by hand, use pliers gently to secure and replave lower basket.

1- replaced accumulator filter and docking station with flappers, the docking station with flappers may not have been necessary? But what the heck, if your into it this far why not. Check out the tech. Video it was helpful. The dishwasher works like new now. 2- the door latch switch was worn out, to replace this part I first unplugged the power cord then removed the 8 screws from the inner panel of the door exposing the door latch assembly. Unplugged the two connectors and installed the new part and reassembled everything, pretty easy! The dishwasher works like new now, and for around $ 102.00 bucks, saved lots of money doing it myself, thank you Parts Select for your help. Carlos, Lancaster, California.

All steps were easy except the Maytag layout made it hard to get to the fittings to remove and reconnect the water line. After that we just moved the dishwasher from beneath the counter and laid it down on the front. Removing and testing the old heater element was easy. The hardest part of installing the element was the odd clips inside the dishwasher. I need to return the o-ring and nuts because you included them with the heating element.