ADB1200AWW Amana Dishwasher - Instructions

Repair was very quick. Pop the lock on each rail endcap with a flathead screwdriver, remove endcap and set aside. One at a time, unclip each wheel from it's mount point and replace with new wheel, clipping it back into place. Once all four are done, reinsert the end caps and re-engage the locks (can be done by hand. Total repair time was maybe 5 minutes. Upper rack slides like new again.

My husband who is not handy, went to UTube typed in Handle Latch Assembly and got step by step instructions.

lifted old one out put new one in

loosened and took out 6 screws to the handle and power wires. replaced the new handle and door latch assembly. SIMPLE saved the price of a house call plus mark up on part.

Very easy to replace me and my 11 year old son did it. I supervised he did the work

Unplug electric, removed interior screws on door. Handle and door assembly simply unplugs, wrote down connection location description, model number, serial number. Went online to partselect.com and ordered. Within several days the new part arrived and installed part, reassemble and complete in a total of 7 minutes. I saved over $10 through partselect.com. Ken

Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!

My boyfriend easily took out the existing handle/latch and replaced with the new handle/latch. Partselect made it very simple to locate which handle/latch I needed, as I had the model # of my dishwasher. I called Customer Service to verify this part would fit with my model # and they said, 'yes,' with confidence. They were right! I will definitely use Partselect again.

My son-in-law made quick work of it - less than 10 minutes. Being a master mechanic he did beat the time of the 67 year old female but not by much! Seriously the part was quickly delivered, easy to install and everything went very well.We are very satisfied and pleased to save a repair bill.

All steps were easy except the Maytag layout made it hard to get to the fittings to remove and reconnect the water line. After that we just moved the dishwasher from beneath the counter and laid it down on the front. Removing and testing the old heater element was easy. The hardest part of installing the element was the odd clips inside the dishwasher. I need to return the o-ring and nuts because you included them with the heating element.

Reviewing the process on You Tube saves a lot of time. It took more time to find the correct circuit breaker for the dishwasher than the repair itself; that easy. Thanks.

removed door liner and removed and replaced the electronic control board. reinstalled door liner and reconnected electrical power by closing the circuit breaker. Started the dishwasher and ran it through a normal wash cycle to flush out and clean the dishwasher. All operations were normal. Piece of cake repair thanks to your troubleshooting guide. Thanks for including the tech data with the replacement control board. Lawrence Faison