7MMPS0070VM0 Maytag Washer - Instructions

Parts Select is outstanding..They diagnosed the problem quickly..The part was sent within 2 days and we were washing laundry the 3rd afternoon...THANKS!!!!!!

Just watched the video provided by parts select and then went to work. Excellent video. If I had been better mechanically inclined it would have been much faster. Thank You Parts Select! Also fast shipping.

I watched the video that PartSelect provided on their web site. The instructions were very precise and easy to follow. I watched the video twice and just followed the instructions. I would highly recommend this approach to washing machine repairs. It certainly saved me a lot of money.

I watched a vidio on YouTube and figured the problem.then I tryed to find the clutch local but no luck! So I yahooed it and found this web sight,I ordered the the part and it came in a few days.The part showed up on a Friday and I put it in the next morning.I watched the link your parts sight refered me to and was very good ! I got all the tools together and started the project,it wasn't the exact same unit but it showed you enough to figure it out.I ran the vidio as I did the project and it went smoothly.I am very happy with the parts, the web sight and the lincks it shared with me . I booked marked the sight for future reference and have already shrared it with someone who has the same problem. thank you for all the help!

The video installation instruction was clear and very easy to follow. However, after installing the parts and started testing the washer, the water overflowed. It looks like the water level sensor wasn't working. It caused a little flooding in the area where the washer is. I took the control panel apart once more and this time diagnosed the water level sensor and analyzed how it works. After spending almost 45 minutes with, I detached the hose attachment and blew air which caused air bubbles in the inner side of the drum. I bent the hose to hold the air while re-attaching same to the sensor. This fixed the problem and the washer is once more, operating normally. Please include this part to your video instruction. Overall, it took me 8 hours on the project including the cleanup due to overflow.

First of all I must say thanks guys for your help, the instructions were right on the money. I first replaced the clutch as per the instructions but found out that the problem was the motor coupling ........ It was broken. I ordered it, followed the instructions and I was a hero in my household. Once more thanks guys.

We got the parts, watched your video a couple of times and then began the repair. It went well with one exception. None of my socket extensions were long enough to work well. The required length might be added to the video and the printed installation instructions. Also it would have nice to have been able to order a small tube of the recommended lubricant. Overall I was very pleased. Jack

took off front cabinet removed pump,and then motor and replaced part.

Followed partsselect video repair guide... it went super.

Watched the video and it was very straight forward, very easy and time saving. I just wish the delivery time for the part was that fast (It was a quick delivery).

This is a relatively easy repair. The difficult part is removing the housing that holds the timer and other knobs. However, once I realized how it comes apart, it is very easy. I removed more of the housing than I needed to in order to get to the timer. You DO NOT need to remove the plastic side panels on the housing faceplate. Once the timer is exposed, one screw and the knob holds it in place. It is very easy to remove and there was an small instruction label advising how to remove the knob. Without that, I would probably have broken the knob trying to pull it off. Once everything was removed, installing the new timer was very easy. Putting everything back that I had taken off was straight forward and would have been even easier had I not taken more things apart than I needed to. I watched a video on the Whirlpool parts site that showed how simple this is to accomplish, unfortunately, I watched it after I had already started the repair job. I would definitely recommend doing this yourself. It saved me a ton of money I'm sure.

After watching the repair video by partselect.com I followed the directions exactly. It turned out to be a piece of cake. I found out that partselect.com has many, many do it your self repair videos on youtube.com. I intend to use them for future repairs. Thank you partselect.com.

Determined based on some Internet searches that the part that we needed was the motor coupling; washer would not spin or agitate. Once I figured out how to removed the cover (by the way, one of the guys at an appliance store told me how to do it), and reviewing the video on your website, I removed the two screws and four clips, dropped the motor, inserted the parts and put it back together - all in about 15 or 20 minutes. It was easy and clean and the washer worked again. Hopefully go for another 5-10 years. Thanks.

went to you tube and watched a video on how to take it apart and replace the clutch assembly.

So, the instructional video was great but be warned that you REALLY need to hammer the part into place. Basically hammer it into place so that the end of the shaft that it goes on is flush with the plastic piece of the coupler on both ends. Otherwise, you'll put the washer together and run a load and it'll squeal and smell like burning rubber. We had to take it apart like 3 times before we got it on there securely enough. We would then run an empty load and it would be fine but as soon as we would add clothes the squealing and burning would ensure. So, my advice is to hammer it in well and save yourself the time and struggle!