7MLSQ9659PW1 Whirlpool Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Machine fills then just hums
After alot of helpful advise from you guys I replaced coupling water pump clutch, and the problem was still their. Then I tested motor capacitor and it appears dead. So I should receive new one tomorrow and hopefully success! I turned machine over and oil leak..so that's where the string with hose and air needle come in handy to put 90weight oil in through breather hole in gear case.
Parts Used:
-
Kevin from Center Point, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator was not working
-
William from Middletown, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Upper section of agitator worn out and noisy.
I removed the old agitator, cleaned any debis and placed the new part over the spindle. I tightened the nut and placed the separator part and the fabric dispensor on the new part and all was complete. After viewing the video I was expecting to have to assemble the ratchet part but the agitator came with that assembly already assembled and in place. The part shipped quickly and arrived in perfect condition.
Parts Used:
-
David from Morrow, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!