66513923K014 Kenmore Dishwasher - Instructions

Determined that main control board was not providing power to control functions. Replaced board with new level of board that was a substitute for the original part.

First turn off power to the dishwasher at the circuit breaker! Check the door panel screws they were star screws which I was able to remove with an allen wrench(more difficult). Follow the instruction included in the Fuse package. Follow and understand each step before doing the task and it will go smoothly.

Replaced latch switch with parts-select whirlpool (usa) model (good choice) and unit still wouldn't turn on. I then turned 115 vac power off to unit for 1 minute and then back on and unit worked correctly with no additional problems. .

I tried to reset the breaker but still no function, I removed the door panel and the control panel , I located the thermal fuse located under the white cover that protects the main board, I turned off the breaker and checked the fuse for continuity using my multimeter, I found the fuse was showing being open, or blown, I removed the fuse and inspected the contacts and the main board, l replaced the fuse and followed the instructions that came with the fuse kit, I then reset the breaker , I had washer function but it wouldn't operate properly, bad control board, a lemon.