61004753 Kenmore Refrigerator - Instructions

Previewed the videos supplied by PartSelect first. Followed the directions to remove the control panel that contained both the old switch and the old actuator pad. Removed old switch and old actuator pad. Then spent about 45 minutes cleaning lime deposits on wate tube and around ice-maker chute. Our unit was nearly 4 years old. Used a tooth brush, white vinegar, and elbow grease to remove the lime buildup. Then put in new switch and new actuator pad; and reassembled panels back into door. Total time about 75 minutes.

Followed the video exactly. Replaced both valves in less than 1 hour. No more leakage. Very simple!

I followed the instructions that came with the kit.

We put all the new parts in that came with this kit including the Solenoid. It was super easy. I have a home warranty which covered the refrigerator ice maker, however, it would have cost me $75 just to bring out a repairman and then it would have taken up my time to be around when he wanted to come out. Buying this part and doing the job ourself cost me less money AND time.

replacing the electric water valves was not to bad took about 30 minutes but still had low water pressure traced it to the filter housing had good pressure going in but low coming out so I removed the housing and found a rubber washer was restricting the water flow so I removed the washer ,put it back together and it worked fine

Removed dispenser unit, replaced solenoid and door support, and reassembled. Repair video on website was extremely helpful. Only needed door support but found it was easier to order and install the entire assembly with the new door. Item number PS2003478

First locked the control panel to prevent more water from coming out. Then figured out how to remove the panel (using torque bit), along with the control board and switch. Removed the switch from the assembly, and used a multimeter to diagnose that the switch was intermittently closing. Searched using Google to find the switch part number, and was able to get the best price and match at PartSelect without having to order in bulk. I'm always wary about ordering off eBay, and prefer dealing directly with a supply company. Once the new switch came, it was a snap to install it and reassemble the water dispenser board and front panel. Once assembled, the dispenser worked like new! Overall, it took about an hour or less of diagnosing and work, plus wait time for ordering, and about $25 for the part. Beat calling a repairman and paying $100 for the same work.

Your video made this repair simple. Thanks for the info. Also received my parts on time. Keep up the good job .

I replaced the door kit, solenoid and return spring. The old door was worn out and was no longer attached to the return spring. The repair was very simple and the instruction kit sent with the replacement parts was extremely informative and helpful. This repair took less then five minutes.

Pretty simple really...take out a couple screws and the face plate comes off. Take out the dispenser apparatus behind the face plate and you will see the little lever operated switch that activates the dispensers. Mine had one terminal slightly discolored like it got hot...so that is a good clue. Also, the whole system is pretty simple really, and the switch was clearly the culprit. I got the replacement switch from PartSelect in just a few days, and put it in. The whole deal only takes about 1/2 hour cradle to grave. The dispensers work fine now, and I think I saved at least $150 for a service call. BIG PAPA small

Ordered solenoid, watched video, replaced solenoid, works great.

I followed the video exactly

After receiving the parts to repair the ice door, I replaced the solenoid and new chute door without problem. Then a problem I had been experiencing for well over a year, re-emerged. No Ice! I realized the icemaker was old, over 12 years and that the Teflon within the wells as well as the contacts for the timer were well worn. The ease of finding parts and the instructions provided by PartSelect, (written, video and users), I would attempt the replacement of the Ice Maker. When I examined the Freezer, I also identified that the Ice Maker shelf and enclosure (where the auger that drives the ice) was broken and barely hanging in place. I quickly identified the additional parts and ordered them. The total repair took about 60 minutes. and was treated to the sound of ice dropping into the bin by early evening. I am very pleased with the service, the quality of the products and the helpful hints from fellow users. I have added PartSelect to my IE favorites and it will be my first stop when I need repairs for any of my appliances.

I had to do this repair three years ago and found that the instructions provided by PartSelect were perfect. The video links provided this time on how to disassemble, do repair, and reassemble were extremely helpful. I followed those instructions and completed the job in less than one-half hour. The water now shuts down as it should. I really cannot add to the helpful write-ups by other customers. Thanks

I watched the instruction video and followed the instructions. Removed the old valves and installed the new one with the same water supply and electric wires