56411D5WW General Electric Washer - Parts

Split Ring

★★★★★

★★★★★

(8)

This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T... Add to cart

Hub Nut

★★★★★

★★★★★

(6)

This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. T... Add to cart

Tub Bearing

★★★★★

★★★★★

(2)

This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you... Add to cart

Hub Washer

★★★★★

★★★★★

(2)

This is a replacement hub washer for your washing machine. If your washer is noisy, leaking, shaking, or pumping without spinning, you may need to replace the hub washer. The hub washer is found under... Add to cart

Compression Ring

★★★★★

★★★★★

(1)

Used in conjunction with the timer dial knob assembly. Add to cart

Pump to Tub Inlet Drain Hose

★★★★★

★★★★★

(8)

This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide. Add to cart

Water Level Pressure Switch

★★★★★

★★★★★

(6)

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the corre... Add to cart

Water Pressure Switch Hose

★★★★★

★★★★★

(11)

This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, s... Add to cart

Fabric Softener Dispenser

★★★★★

★★★★★

(16)

This part is a replacement fabric softener dispenser for your washer. If your washer will not dispense fabric softener or detergent, or will not agitate, you may need to replace the dispenser. When it... Add to cart

Socket Rod Support - White

★★★★★

★★★★★

(1)

This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the ro... Add to cart

Inner Tub Base Hub

★★★★★

★★★★★

(5)

This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, a... Add to cart

Screw - Black This screw is sold individually. Add to cart