56121T3WW General Electric Washer - Instructions

Found that the teeth and the agitator coupler hade stripped out. Replaced the coupling and everything worked great. 10 Min and $10. 00 Fixed it up.

removed the drain hose clip and pulled the old broken drain hose extension out at base of washer rear... pushed the new drain hose extension into washer and screwed the new drain hose clip inot place two screws... very simple very easy very fast... problem solved

Took off old agitator, removed coupling that was bad and put new one on.

It would agitate but not the final spin and no code on display or l. E. D. The led worked I had a green one on inverter I found that the fuse (in the wiring behind front panel )was blown or open probably a electron blew the fuse lol well then I replaced the fuse with an automotive fuse holder and installed a 10 amp fuse which was blown and went through the test cycle and I got nothing for agitate or spin (dohh) so the chart and online said bad motor / inverter I ordered one and received it in 4 days installed in 20 minutes and went through the test cycle with red l. E. D. And it passed so I reasembled took out my fuse and installed a jumper where the fuse was as instructed in literature with the new motor and im doing laundry again thank you