All Installation Instructions for Whirlpool Refrigerator 4YET22DKFN01

light did not work on the refrigerator side

bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what is inside the refer!

Parts Used:

Refrigerator Door Switch

David from GROVESPRING, MO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

gasket was cut and ripped

rippped the old one off and carfully put the new one on with a flat head screwdriver at an angle as not to rip the new one

Parts Used:

Refrigerator Door Gasket - Beige

Herbert from NIAGARA FALLS, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door would pop open. I cleaned gasket made sure nothing in the way of door. Gasket was cracked top and bottom it worked better but the seal was not good.

Did just like the video showed took doors off daughter helped take off doors so easy put door on blanket. My daughter 38 went to town putting it on just watch the corners so easy two days after installation the door seals great. You can do this.

Parts Used:

Refrigerator Door Gasket - Beige

Roy from KAUFMAN, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The fridge was missing the lower shelf bar on the door

The bar slipped right into a groove on each side and took less than 5 seconds.

Parts Used:

Door Shelf Retainer Bar

MARK from OJAI, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the meat drawer was broken.

I was prepared for the part not to fit because it's a 23-year-old fridge, but it fit perfectly, no issues whatsoever. I plan to buy a crisper drawer as well. Glad I found this vendor.

Parts Used:

Meat Drawer

Doris from SAN ANTONIO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

no drawer

just insert

Parts Used:

Refrigerator Crisper Drawer

Xiaoping from KIRKLAND, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rerigerator was leaving a lot of condensation on top shelf in refrigerator.

Removal of the door gasket went quite fast. First i needed a 8mm wrench. That what I didn't have. Got the socket set, not the wrench. Tried adjustable wrench, went slow. I slowly got the bolts out. Putting the gasket on was slow. Then I get to the last corner, was awful for me. I finally get it on. Putting the freezer door back on 1st went crazy. I finally looked on top of refrigerator, saw (3) bolts, removed them, installment went easy from there.

Parts Used:

Refrigerator Door Gasket - Beige

James from MEMPHIS, TN
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Socket set, Wrench (Adjustable)

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The drawer cracked and broke.

Just slid the drawer into the runners and finished.

Parts Used:

Meat Drawer

Leonard from MASTIC BEACH, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door Shelf end cap was broken

I just snapped it into place. Easy Peasy!!!!

Parts Used:

Door Shelf End Cap - Left or Right Side

Leora O from PIERZ, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I had taken freezer door off when moving and misplaced the one of the hinges.

I attached the hinge and secured it with screws and socket wrench.

Parts Used:

Bottom Door Hinge with Pin

Darlene from Philadelphia, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Shelf broker which holds the crisp drawers

Wife did the replacement of the the plastic part very easy to do. I was very impressed with the speed in which the part was delivered to my home after it was ordered. Thank you very much. Lamar.

Parts Used:

Crisper Cover Frame

Lamar from American Fork, UT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My Crisper Pan was broken so I needed a new one.

I ordered a new one waited for the new ones to come in once it did I took out the old ones and replaced them with the new ones. It was simple.

Parts Used:

Refrigerator Crisper Drawer

Debra from Lakewood, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Light Socket Burned Out.

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Parts Used: