Models
>
4157
4157 - Overview
Models starting with 4157
Click on the best match to narrow your results.
- 41571 Toro Chainsaw (Speedometer Multi Pro 5500)
- 41572 ( 230000001-230999999 2003 ) Toro Chainsaw (Foam Marker Kit Multi Pro 1200/1250/5600 Turf Sprayers)
- 41572 ( 240000001-240999999 2004 ) Toro Chainsaw (Foam Marker Kit Multi Pro 1200/1250/5600 Turf Sprayers)
- 41572 ( 1990 ) MTD Lawn Mower (MTD Lawn Mower Model 41572/1990 Parts)
- 41572 LG Washer (LG Washing Machine Model 41572 Parts)
- 41572 ( 1991 ) MTD Lawn Mower (MTD Lawn Mower Model 41572/1991 Parts)
- 41572 ( ABWESEU ) LG Washer (Washer)
- 41573 LG Washer (LG Washing Machine Model 41573 Parts)
- 41574 Toro Chainsaw (Foam Marker Kit Multi Pro 5500 1200 And 1250)
- 41576 ( 1991 ) MTD Lawn Mower (MTD Lawn Mower Model 41576/1991 Parts)
- 41576 ( 1990 ) MTD Lawn Mower (MTD Lawn Mower Model 41576/1990 Parts)
Exact Part matches for your search term
[Viewing 2 of 2]
Reservoir
This part number matches the current model number 4157
PartSelect #: PS8972728
Manufacturer #: 4157
No Longer Available
Carburetor Diaphragm
This part number matches the current model number 4157
PartSelect #: PS12613822
Manufacturer #: 4157
10 pack of Diaphragm 270026. This diaphragm is located between the carburetor and the gas tank and draws fuel from the tank into the carburetor.
$34.55
Special Order
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve - Hot
PartSelect #: PS3527427
Manufacturer #: 5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow...
$26.80
In Stock
Magnetic Door Plunger
PartSelect #: PS3618292
Manufacturer #: AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door ...
$24.28
In Stock
Water Inlet Valve - Cold
PartSelect #: PS11728995
Manufacturer #: 5220FR2075L
The cold water inlet valve on your washing machine dispenses the cold water and bleach into the washer in the prewash cycle. This inlet valve has a standard hose fitting inlet and 2 water outlets faci...
$72.90
In Stock
Tub-to-Pump Drain Hose
PartSelect #: PS3523345
Manufacturer #: 4738ER1002A
This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to th...
$41.72
In Stock
Shock Absorber Kit
PartSelect #: PS3522313
Manufacturer #: 383EER3001J
This kit includes 1 shock absorber and 2 pins.
$63.16
In Stock
Gasket
PartSelect #: PS3522859
Manufacturer #: 4036ER4001B
This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two sections of the tub,...
$31.60
In Stock
Detergent Dispenser
PartSelect #: PS3522644
Manufacturer #: 3891ER2003A
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
$27.79
In Stock
BEARING,BALL
PartSelect #: PS7785069
Manufacturer #: 4280EN4001C
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, th...
$63.71
In Stock
Washer Hose with Bellows
PartSelect #: PS3523347
Manufacturer #: 4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
$31.32
In Stock
Washer Tub Bearing
PartSelect #: PS11711139
Manufacturer #: MAP61913708
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
$48.20
In Stock
Pump Filter
PartSelect #: PS3522306
Manufacturer #: 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your wa...
$26.76
In Stock
Locking Pin
PartSelect #: PS3523451
Manufacturer #: 4774FR3118B
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made ent...
$14.48
On Order
Common Symptoms of models starting with 4157
[Viewing 9 of 9]Leaking
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replac
... Read more
e the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Read less
Parts Used:
-
Omnitech from Warrenville, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
153 of 169 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Parts Used:
-
Leslie from STOWE, VT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
46 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve leak
Followed directions on the video and went like a charm. Very impressed with service and video
Parts Used:
-
John from Northport, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
34 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!