41573 LG Washer Parts & Repair Help | PartSelect
Models > 41573
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(33)
PartSelect #:PS3527427
Manufacturer #:5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet ...
$21.26
In Stock
Order within the next 7 hrs and your part ships today!
(35)
PartSelect #:PS3618292
Manufacturer #:AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it...
$19.00
In Stock
Order within the next 7 hrs and your part ships today!
(7)
PartSelect #:PS3523345
Manufacturer #:4738ER1002A
This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub...
$22.50
In Stock
Order within the next 7 hrs and your part ships today!
(14)
PartSelect #:PS3522644
Manufacturer #:3891ER2003A
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the deterge...
$11.66
In Stock
Order within the next 7 hrs and your part ships today!
(6)
PartSelect #:PS3522859
Manufacturer #:4036ER4001B
This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two ...
$12.52
In Stock
Order within the next 7 hrs and your part ships today!
PartSelect #:PS7321743
Manufacturer #:4774EN3002A
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in...
$5.65
In Stock
Order within the next 7 hrs and your part ships today!
(2)
PartSelect #:PS3523347
Manufacturer #:4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The ...
$23.02
In Stock
Order within the next 7 hrs and your part ships today!
(2)
PartSelect #:PS11711139
Manufacturer #:MAP61913708
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
$39.41
In Stock
Order within the next 7 hrs and your part ships today!
(2)
PartSelect #:PS10058954
Manufacturer #:FAA31690703
$10.64
In Stock
Order within the next 7 hrs and your part ships today!
(4)
PartSelect #:PS3524578
Manufacturer #:4970FR2084Z
$18.40
In Stock
Order within the next 7 hrs and your part ships today!
Questions and Answers for 41573
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door would not close

Magnetic Door Plunger – Part Number: AGM73610701
  • Customer: Omnitech from Warrenville, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 142 of 152 people found this instruction helpful
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18... read more

leaking tub-to-pump drain hose

  • Customer: Leslie from STOWE, VT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 23 of 28 people found this instruction helpful
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel. read more

Water was filling continues even the machine was unplugged

  • Customer: Sanjay from HOLTSVILLE, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 14 of 18 people found this instruction helpful
I did repaired while looking at video at your site .thanks to your team .. read more