3201 Snapper Snow Blower - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Blower chute kept falling off
Ordered the plastic chute retainer parts. 3 required. Remove screws from chute to retainer 6 total. Replace chute and hold retainer clip under chute and replace screws. Do not over tighten only made of plastic. Make sure to spray some wd 40 on rim so it moves smoothly. If it doesnt loosen screws a little. Works perfect.
Parts Used:
-
Michael from FAIRMONT, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installed new scrapper blade
Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks
Parts Used:
-
Larry from ULYSSES, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old auger broke
-
John from COLUMBUS, OH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!