30-3978-66-05 Tappan Range - Instructions

Glide just slipped out and the other in.So pleased at how fast the part arrived!! Less than a week.

After reading the input of others on your site I ordered the igniter. Within a short time it was installed and the oven works fine. Thanks for the help, jc

First i disconected the plug went right where the trouble was.removed the two screws and the safe plate that is protecting the wires.disconeted the two wires and replaced the new ignighter. put everythin back together tried it out ond guess what ??? it works .. Thank you

I took the drawer completely out and installed the new clip just like the video instructed. All went very well with no problems. The drawer works like new. I am glad that I was able to find the part on this site. Thank you so much. I will be using this site in the future.

Very easy. Dont know why I didn't do this earlier.

had to cut to make a three end so it would plug in all three places

This was the easiest do it yourself repair job to be had so simple just push the new clip in the hole and you are done so easy. Audrey

Snapped in the new replacement part and intalled stove drawer in less then two minutes.

I searched the internet for help, that lead me to your site. I typed in the make and model. Within seconds some drawings appeared, showing the part I needed. I watched your video on making the repair. You make it so easy. I ordered the parts you recommended. They arrived in just a couple of days. I went back to your site to take another look at your video and I was ready. In just minutes, I had the drawer out, installed the new guides. The one side, the guide was completely gone, so I could snap in the new2 guide as you recommended. The other side, the guide was broken off and I had to use a needle nose pliers to get it out. Then snaped in the new guide. Re-installed the drawer with all the goodies, wax paper, tin-foil, baggies etc. Closaed t6he drawer and everything lined up perfectly. Thanks to you I've got a drawer that works again aqnd I got it done before my husband got home from work. Funny thing, he hasn't complained or asked me about the drawer. I guess that will be our little secret....Thanks Julie

Removed the drawer, simply snapped the rear drawer glide in the punch-out by hand, replaced the drawer. Works well

The repair was as simple as reattaching the broken glider. No tools were needed.

My mom did the repair for me. We did not have the right tools for the job which made it harder to do. First I flipped the breaker. Then we took out the oven racks. We then took the bottom metal part off the oven. This exposed the shield part and we removed it. Then she cut the wires and connected the new igniter the same way the old one was connected. It took about thirty minutes. We could do it again in about fifteen with the right tools. We went and priced new stoves the cheapest was 350.00. I'm so excited that my stove is working properly again.

Ordered part which arrived in 2 days, yeah!! Installation was really simple, took less than a minute. The online instructions/ video were very helpful! Excellent site to order parts!

I watched the short video on the site that showed how to replace the glides. It was key since it showed how to use a screwdriver to remover the old slide. The new ones then popped right in place.

Popped out the old...snapped in the new. All of about 5 minutes or less.