Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 25371832102 > Parts

25371832102 Kenmore Refrigerator - Parts

All parts for the Kenmore Refrigerator 25371832102

Below is a list of all parts for the Kenmore Refrigerator 25371832102. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 25371832102
29-42 of 167
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.78

Upper Hinge

This is the top hinge.

$6.69

Hexagonal Screw

Sold individually.

$6.80

SCREW

Sold individually.

$35.05

Lower Hinge Bracket

$7.69

TUBE-WATER FILL

This is a water fill tube which is used in refrigerators. It attaches to the water inlet valve and supplies water to the components in your appliance that need it, such as the icem...

$31.00

Kickplate Grille

This white kickplate grill is attached to the bottom of the refrigerator.

$8.84

Center Hinge Pin

$44.71

Ice Container

The ice bin, located in a freezer, is a storage container used for storing ice. Ice cubes collect there after they are made. If your bin is cracked or damaged, it is best to replace this part. To repair, first open your freezer door and dump any leftover ice residing in bin before removing it. Next, release ice bin from assembly by releasing the locking tabs. With a flathead screwdriver, flex the tabs inwards on each side. Make sure to bend them enough to unlock and pull assembly from the ice bucket. Line up the new ice bin with assembly before installing it. Refer to the manual provided by the manufacturer for further installation instructions.

$57.78

Door Handle

Handle only.

$30.66

Front Roller

$35.60

SOCKET-LIGHT

$9.73

LAMP

$8.72

Touch Up Paint - White

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear....

$6.25

ICE STRIPPER

The ice stripper goes on the front of the ice maker and directs the ice cubes from the maker to the bin. Due to the frigid temperatures, the plastic breaks down and cracks from time to time. This may cause the ice cubes to get stuck in the ice maker and not dispense properly. You will need to open the freezer door, pull out the ice container by lifting and pulling out. Unplug the ice maker by releasing the locking tabs. Use your 1/4-inch nut driver to remove the screws holding the ice maker in place. Take the ice maker out of the freezer for easy access. The ice stripper can be removed by simply unlatching from the pin holding it in place. The new ice stripper should just click into place so the tab goes into the control head with ease.

All Parts for the 25371832102
29-42 of 167