Models > 22164TE > Instructions

22164TE Toro Lawn Mower - Instructions

All Instructions for the 22164TE
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Parts Used:
Spacer-Driver Blade Driver Assembly
  • randy from HIGHLAND, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
6 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lawn mower poor idle
will look at my lawn mower carburetor i found i needed a couple of gaskets and a fuel primer. you had the part so i order.
after a good carb cleaning and the new parts it now it runs fine.
Parts Used:
Bolt
  • fred from SAN CARLOS, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torsion spring broken
I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked
Parts Used:
Spring-Torsion
  • Henry from ORLAND PARK, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 22164TE
1 - 3 of 3
Back to Top