Models
>
22164TE
22164TE Toro Lawn Mower - Overview
Models starting with 22164TE
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
In Stock
Ring-Clip, Locking
PartSelect #: PS9052921
Manufacturer #: 65-2720
This OEM Locking Ring holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Installation is rated as "Easy" by customers and will require pliers. The part secure...
$3.99
In Stock
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$3.99
In Stock
Seal-Oil-Rvc2 6X11X10.2
PartSelect #: PS9160722
Manufacturer #: 92049-7001
This OEM oil seal creates an airtight seal in your engine, preventing cylinder head leaks. Made of metal and rubber, it has an inner diameter of 6 mm, an outer diameter of 11 mm, and a thickness of 10...
$8.88
On Order
Bearing-Ball
PartSelect #: PS8960493
Manufacturer #: 38-7820
This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, bla...
$14.32
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Parts Used:
-
randy from HIGHLAND, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
6 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lawn mower poor idle
will look at my lawn mower carburetor i found i needed a couple of gaskets and a fuel primer. you had the part so i order.
after a good carb cleaning and the new parts it now it runs fine.
after a good carb cleaning and the new parts it now it runs fine.
Parts Used:
-
fred from SAN CARLOS, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torsion spring broken
I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked
Parts Used:
-
Henry from ORLAND PARK, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!