Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11082822102 > Instructions

11082822102 Kenmore Dryer - Instructions

All installation instructions for 11082822102 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 11082822102
526-540 of 871
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer would run, but there was no heat going to the unit

  • Customer: Rachel from Davenport, IA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It could not have been easier, thanks to the video displayed when I ordered the part. It was as easy as removing the back of the dryer, taking out the old fuse and putting in a new old. I have NO repair experience, so little I had to borrow the nutdriver from the maintance man at work. I was more then a little leary to try this repair on my own, but decided it was worth all the money I would save not having to call a repair man for my dryer. Sure glad I did I will continue to attempt more repairs on my own.

stopped making heat

  • Customer: daniel from Centereach, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
i replaced the two sensors in the heating element which were very clear in your diagram and it worked perfectly

Dryer would do nothing at all.

  • Customer: Joseph from Flora, MS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Checked voltage coming into unit, good. Checked schematic and traced the voltage through the safeties and interlocks. Found the problem at the thermal link. Isolated unit from all voltage sources. Removed part and ohmed the resistance. Found it open. Ordered new link and it arrived before schedule. Replaced and connected wiring, returned power and tested. Worked great! Very easy to find and repair!

Dryer would not heat

  • Customer: Jim from Monongahela, PA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
After reading the repair suggestions I ordered the parts. Thinking my dryer would be down for a long time, the parts came within 48 hours. With the video's help the repair took less than an hour. Part select is a great company to deal with. Thanks

The seal on the lint filter was not well attached

  • Customer: Kathleen from Dyke, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replacing the filter was easy - the new filtes's seal seems much more secure. The new one works much better than the old one.

door would open during drying cycle and shut off machine

  • Customer: Robert from Rochester, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Got online with parts select, easily found the parts needed and ordered them. They arrived very quickly. The repair itself took all of 5 minutes and now the dryer door stays shut like it is supposed to. Only complaint is shipping was more than the parts but then again, I didn't waste a lot of time running all over town looking for what I needed. So, in the long run I saved money , especially when compared to a calling someone else to fix it.(big bucks for even the most minor service call as you all know).

Broken handle

  • Customer: Dr. Tresa from Hopkinsville, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Remove the small screws on inside of the door, removed 2 screws on the handled. Replaced broken handle with new one. Screwed all screws. Easy th follow instructions

Sqeaky Dryer

  • Customer: Mona from Vacaville, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband changed the idler pulley. It took him 5 min. Thank you sooooooooooo much. Saved us 1000.00 dollars. He wanted to by a new one but investigated the problem on line. He is a handyman and was just being lazy. I ordered the part and he fixed it. I love saving money!!!!!!!!!!!!! And I love my husband!!!!!!!!!!!!!!

door kept pooping open, clothes took forever to dry. Lot of wasted time and energy and money. Wish we would have reapired a long time ago.

  • Customer: William from Murrieta, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
pop off put in done

Dryer had no heat

  • Customer: Danny from Woodbridge, VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Opened up unit and followed tech directions on inside pocket to isolate the problem to the heating element. Pulled it out and sure enough it was broken in one place. Found the part on PartSelect and ordered it on Saturday, received it on Wednesday. Replaced the new heating element into the assembly, reinstalled the assembly and connected the wires. Works like new now!

Fuse blown

  • Customer: cheyenne from French Lick, IN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed power cord. Removed screws in back cover. Checked electrical diagram. Found fuse, checked. New part arrived promptly on time. Was correct part. Tested before instalation. removed one screw that held fuse. unpluged the two wires. Repluged wires, reinstalled screw.on new fuse, replaced back cover and screws. recoupled power, tested. ran perfect.

My dryer ran but had no heat

  • Customer: cathi from riverside, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I removed the back of the dryer (after unplugging and shutting off the gas valve) I vacuumed any fuzz and debris. I also removed the dryer vent and cleaned that too. I unscrewed the thermal fuse and replaced it with the new one. I wiped everything down and replaced the back and ran the dryer and it worked! Thanks for your help and for saving me money! My husband was so glad we didn't have to call a service man we celebrated by going out to dinner!

lights come on but dryer want start

  • Customer: Gregory from Wise, VA
  • Difficulty: Really Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
parts were for a dryer that would not tumble or heat they did not fix problem have called in pro hope he can fix

Felt around the Lint Filter was loose and would not stay

  • Customer: Janice from Central Lake, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took out the old one and put in the new one.

dryer was not heating

  • Customer: Peaches from Phoenix, AZ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
I thought that I was going to have to buy a new dryer or rather a used one to replace my dryer when it stopped heating. I knew I could not afford an appliance repair person to come out to the house, so I searched for my appliance on the internet for repair parts. Your website helped me to figure out the part that I needed to replace; i.e. the thermal fuse for $9. Since you advertised that you took return parts, I placed my order. Without any hassle short of the obvious moving the dryer away from the wall and removing the back panel I was able to do this in a short time. I was so excited to realize that my dryer was heating up. Thank you.
All Instructions for the 11082822102
526-540 of 871