11079133410 Kenmore Dryer - Parts

M Series New Style Coil Kit

★★★★★

★★★★★

(148)

When the igniter reaches a high enough temperature, these coils (Coil Valve, Dryer Gas Valve Coil Kit, Dryer Valve Coil Kit, Gas Valve Solenoid) work together to open the gas valve and allow the gas t... Add to cart

Dryer Drum Support Roller

★★★★★

★★★★★

(38)

This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d... Add to cart

Igniter Kit

★★★★★

★★★★★

(33)

If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-in... Add to cart

Thermostat, Internal-Bias

★★★★★

★★★★★

(30)

The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l... Add to cart

Roller Support Tri-Ring

★★★★★

★★★★★

(5)

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul... Add to cart

Dryer Radiant Flame Sensor

★★★★★

★★★★★

(12)

If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough ... Add to cart

Screw, 8/18 x 3/8

★★★★★

★★★★★

(2)

This screw is sold individually. Add to cart

Screw - 10-16 x 1

★★★★★

★★★★★

(2)

This screw is sold individually. Add to cart

Cover Screw Sold individually. Add to cart

Screw

★★★★★

★★★★★

(5)

Sold individually. Add to cart

LP GAS CON

★★★★★

★★★★★

(11)

This gas conversion kit is used to convert natural gas burners to liquid propane in dryers. If your dryer will not start, heat, or there is an unusual smell, replacing this part can be a solution to t... Add to cart

Blower Wheel

★★★★★

★★★★★

(7)

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ... Add to cart