Models > 11072514100 > Instructions

11072514100 Kenmore Dryer - Instructions

All Instructions for the 11072514100
1546 - 1549 of 1549
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken belt
I replaced belt by myself. Took dryer apart,laid dryer on its back, put belt and pulley on. Rotated drum to make sure seal was in place. Cleaned out machine while I had it apart.
Parts Used:
Multi Rib Belt - 92-1/4"
  • BEVERLY from BURLINGTON, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
wouldn't turn on
Followed the instructions and really quite easy to fix. I didn't know why dryer wouldn't turn on but went with the odds that the thermal fuse was the problem-- and it was. Once I got the part it was back together and running in less than 30 minutes!
Parts Used:
Dryer Thermal Fuse
  • Ron from Zionsville, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
the drter would not start
since dryers are hard for me to determine. I used my OHMs meter to see that the Thermal Fuse was good. The door switch was good . The off on switch was bad.
Parts Used:
Push-To-Start Switch
  • linda from South Lebanon, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer would not heat
I am a licensed electrician I found the bad part and I ordered it and when it came in I replaced it.
Parts Used:
Dryer Thermal Fuse
  • richard from cape girardeau, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 11072514100
1546 - 1549 of 1549
Back to Top