11067851600 Kenmore Dryer - Instructions

Just pulled the old parts out on door latch and put the new ones in. Thanks Parts Select for your prompt response and easy process for order and shipment.

The video from your website is exactly the steps I followed to remove the old door switch 3 wire and install the new one. Very easy! NOTE: 1 Week before the dryer totally stopped working, my mother opened the dryer door when it finished (sound alert) but, the dryer was still spinning + the light did not come on. I noticed that the small black lever (part of the door switch wire which sticks out & presses against the door when the door is closed) was extremely loose. It seemed as if the lever was broken (perhaps the last time I used the dryer the door slipped from my hand and broke the black piece). Video tutorial was great!

I watched a video from Parts Select and learned that most problems with gas dryers revolve around two things: a broken door switch and a burnt fuse. I knew my door switch was broken. So I figured out how to lift the top of the dryer (unscrew two bolts in the back and two screws under the lint screen) and pry the hood open.) The switch was right there, held in place by two screws in the door frame. I received the part I ordered the next day, on the simple ground delivery. I replaced the door switch, closed the lid, tighten everything down. Problem solved for $15!

Remove Lint filter remove two screws that hold lint trap to top of dryer.Use putty knife to push on two top clips that hold top of dryer down on body of dryer.Lift top and locate door wire that go to switch,romove two screws that hold switch unplug three prong connector plug in new switch and reverse disassembly instructions.

We obtained the parts diagram in PDF format, which made disassembly very easy. We then ordered the parts and thanks to the promptness in delivery and knowing how to diassemble the dryer, we replaced the broken parts quickly and without having to call the repairman.

Easy to follow videos on your site made this repair a breeze. I ended up having to replace the high temp cutoff as well but for 60 bux my dryer works like new. The repair man wanted $100 just to come look at it. Could not have done of without the easy to follow video.

Just put the new lint filter in.

(Always unplug dryer before making any repairs) I opened the dryer and checked the heating element. Making sure that the connection was good and nothing was damaged, I determined the problem was overheated wires. They melted and lots connection. I replaced them with the heating element wire connection kit. Easy to install and simple to get right. I cleaned the dryer again with a vaccum cleaner, removing all the lint, and checked the vents, making sure they were clear...I turned the breaker on (it was tripped when the dryer overheated)and everything worked great.

replaced with new one which had been improved upon by a brace down the middle of the screen.