Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 10652603100 > Parts

10652603100 Kenmore Refrigerator - Parts

All parts for the Kenmore Refrigerator 10652603100

Below is a list of all parts for the Kenmore Refrigerator 10652603100. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 10652603100
57-70 of 367
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.85

Dispenser Door Pin

This dispenser door pin comes with the washer.

$6.20

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

$46.80

Heater, Defrost

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the ...

$30.10

Stripper Arm Kit

This kit includes the stripper arm and fill cup.

$135.93

Fresh Food Door Gasket

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$102.76

Air Diffuser

This part is controlled by the thermistor.

$39.86

GRILLE

$97.17

Ice Mold

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.

$21.46

Cap, Water Filter (White)

$135.54

Ice Auger Motor

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

$32.48

Water Filter Outlet Tube Kit

$4.88

Bottom Kickplate Clip

This clip is sold individually.

$58.56

Water Dispenser Reservoir Tubing

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16...

$50.68

Overload and Relay Assembly

This kit comes with the compressor relay, overload and cover.

All Parts for the 10652603100
57-70 of 367